I recently came across a challenge to print a holiday greeting card on a vintage computer, so I decided to make a card on a 1960s IBM 1401 mainframe. The IBM 1401 computer was a low-end business mainframe announced in 1959, and went on to become the most popular computer of the mid-1960s, with more than 10,000 systems in use. The 1401's rental price started at $2500 a month (about $20,000 in current dollars), a low price that made it possible for even a medium-sized business to have a computer for payroll, accounting, inventory, and many other tasks. Although the 1401 was an early all-transistorized computer, these weren't silicon transistors—the 1401 used germanium transistors, the technology before silicon. It used magnetic core memory for storage, holding 16,000 characters.
You can make a greeting card by printing a page and then folding it into quarters to make a card with text on the front and inside. The problem with a line-printer page is that when you fold it into a card shape, the printed text ends up sideways, so you can't simply print readable text. So I decided to make an image and words with sideways ASCII graphics. (Actually the 1401 predates ASCII and uses a BCD-based character set called BCDIC, so it's really BCDIC graphics.) Originally I wanted to write out "Merry Christmas", but there aren't enough characters on a page to make the word "Chrstmas" readable, so I settled on a cheery "Ho Ho Ho". I figured out how to sideways draw a tree and the words, making this file.
Next, I needed a program to print out this file. I have some experience writing assembly code for the IBM 1401 from my previous projects to perform Bitcoin mining on the 1401 and generate Mandelbrot fractals. So I wrote a short program to read in lines from punched cards and print these lines on the high-speed 1403 line printer. The simple solution would be to read a line from a card, print the line, and repeat until done. Instead, I read the entire page image into memory first, and then print the entire page. The reason is that this allows multiple greeting cards to be printed without reloading and rereading the entire card deck. The second complication is that the printer is 132 columns wide, while the punch cards are 80 columns. Instead of using two punch cards per print line, I encoded cards so a "-" in the first column indicates that the card image should be shifted to the right hand side of the page. (I could compress the data, of course, but I didn't want to go to that much effort.)
The 1401 has a strange architecture, with decimal arithmetic and arbitrary-length words, so I won't explain the above code in detail. I'll just point out that the r instruction reads a card, mcw moves characters, w writes a line to the printer, and bce branches if a character equals the specified value.
(See the reference manual for details.)
The next step was to punch the code and data onto cards. Fortunately, I didn't need to type in all the cards by hand. Someone (I think Stan Paddock) attached a USB-controlled relay box to a keypunch, allowing a PC to punch cards.
A few minutes later I had my deck of 77 punch cards. The program itself just took 9 cards; the remainder of the cards held the lines to print.
Once the cards were ready, we loaded the deck into the card reader and hit "Load", causing the cards to start flying through the card reader at a dozen cards per second. Unfortunately, the reader hit an error and stopped. Apparently the alignment of the holes punched by the keypunch didn't quite match the alignment of the card reader, causing a read error.
The card reader contains sets of 80 metal brushes (one for each column of the card) that detect the presence of a hole. Computer restoration expert Frank King disassembled the card reader, removed the brush assembly from the card reader and adjusted it.
After a few tries, we got the card reader to read the program successfully and it started executing. The line printer started rapidly and noisily printing the lines of the card. We had to adjust the line printer's top-of-form a couple times so the card fit on the page, but eventually we got a successful print.
I ejected the page from the printer, tore it off, and folded the card in quarters, yielding the final greeting card. It was a fun project, but Hallmark still wins on convenience.
If you want to know more about the IBM 1401, I've written about its internals here. The Computer History Museum in Mountain View runs demonstrations of the IBM 1401 on Wednesdays and Saturdays. It's amazing that the restoration team was able to get this piece of history working, so if you're in the area you should definitely check it out; the demo schedule is here.
Follow me on Twitter or RSS to find out about my latest blog posts.